When using integrated sewage treatment equipment, the following points should be noted:

Protect the device from damage: Do not place objects or climb on the device to avoid damage to the device.

Safe operation: If you need to use a ladder to operate the equipment, be sure to fix the ladder and be accompanied by other staff, and do not operate alone. When it is necessary to overhaul the equipment under the pool, there must be a protection personnel on hand to protect the safety of the operator at all times and ensure that they do not work alone.

Special Operation Precautions: During the operation of the equipment, the submersible sewage pump cannot be turned off, unless stable maintenance is being carried out. In the case of non-specific work needs, the maintenance port of the equipment shall not be opened at will to prevent danger. Personnel who carry out equipment maintenance and handling work must take adequate protective measures. It is strictly forbidden to carry out maintenance work when the sewage treatment equipment is running live.

Protect measuring instruments: Attention should be paid to protecting all kinds of measuring instruments to prevent them from being damaged by collisions.

Prevent solid substances from entering the equipment: prohibit large solid substances from entering the integrated sewage treatment equipment to prevent blocking the pipes and orifices of the equipment and causing damage to related parts.

Keep the air inlet unobstructed: When the equipment is running, the air inlet of the fan should be ensured to be unobstructed to ensure the ideal sewage treatment effect. If there is a problem, the tuyere should be removed from dirt or replaced in time.

Regular maintenance: In order to prolong the service life of the equipment, regular maintenance should be carried out, including cleaning the sludge in the sedimentation tank and sludge discharge pipeline, checking the area around the valve switch to avoid blockage, regularly releasing water to check the condition of underwater components, and regularly checking the control switch line. In addition, the equipment should be stopped regularly to check the internal wire connections, connection firmness and lubrication between gears.